Tag Archives: apoxie sculpt

The gothest action figure custom ever.

Nico Minoru action figure custom by Suzanne Forbes on balcony Sept 2017Even though I don’t know much about this Nico Minoru character, I had to snap up the adorbs babybat action figure of her!

Hasbro did an incredible job with her, as they have with so many female Marvel Legends figures in the last few years. She’s so goth!

But…I felt she could be MORE goth.

I started this project as a proof of concept for the absurdly male-dominated world of action figure collectors and customizers.

I wanted to demonstrate that there are fantastic customizing resources available in lady-land. Like nail art decals, nail art stripes, nail art “dotters”, flocking, etc.

These materials are cheap, widely available and already scaled tiny as fuck. They’re perfect for action figure customs.

So I began with using nail art decals to enhance Nico’s gothic lace.

I LOVE nail art decals because they remind me of Letratype and LetraSet! Old school! The tiny packets of decals are so cheap, you can get a hundred sheets on eBay for a euro.

I masked the areas I didn’t plan to decorate off, with a cut up rubber glove and tape. Then I sprayed the figure with my clear primer for plastic.

Nico Minoru action figure custom by Suzanne Forbes wipOnce she was dry, I added glitter piping to her corset, more lace to her shirt, lace thigh-highs over her stripey stockings, and so on.

And that was great! Though very subtle.

Then I realized I could use the same miniature making materials I used for my Snow Queen and other mini projects, such as my Horribella Dolls.

Like tiny eyelash picot trim and wired ribbon and elastic ruffle tape.

And all my tiny little rhinestones and crystals and stars and moons! And my little tiny top hats!!!!

Nico Minoru action figure custom by Suzanne Forbes on balcony Sept 2017I just went bananas. I decided to dress Nico full-on San Francisco Goth, Circa 2005.

She would be an homage to all the amazing goth-girls I’ve known, all the beautiful and amazing muses I had the privilege to draw and paint in the Bay Area goth scene for ten years.

Nico Minoru action figure custom by Suzanne Forbes Sept 2017

Six more hours of ferociously focused detail work and one enormous mess later, there she was!

Nico Minoru action figure custom by Suzanne Forbes Sept 2017

Illustration by Tasha Tudor for A LIttle Princess

Illustration by Tasha Tudor for A LIttle Princess

She reminds me of the ur-goth image all little girls of my generation imprinted on, Sara Crewe in her outgrown mourning dress.

That Classic Victorian ragamuffin look commingled with circus and harlequin style in the early years of the new century, in the Bay.

My muses wore stripes and bustles and tiny top hats, and so did I. We all looked fucking great!

That look was replaced by the great wave of Steampunk starting in 2007. I loved the Steampunk just as much, so it was alright!

Look how amazing she looks on the Sorcerers’ Porch of my Action Figure Dollhouse.

Nico Minoru action figure custom by Suzanne Forbes porch with Magic Watch

Toy customizers, please note that I was able to preserve full shoulder and waist articulation under the miniature clothing. Use of stretch fabrics and gluing the clothes only to strategic, rigid areas of the figure allow her a full range of posability.

Oh, action figure customizers and Instagram toy photography bros who find this page by googling, I pity you. They’re dolls, dude. Accept it.

A poseable toy figure of a human with cloth clothing is a doll.

As is often the case, what appears to be a simple doll-making project has a deep cultural wound behind it.

Like most of the toy industry, amazing toy company Mezco (who I love and have supported since their beginnings with Silent Screamers in 2000) has a gender problem. They make dolls, and have from the early days: they make Living Dead Dolls.

They also make action figures, and since 2015, they’ve been combining the two with the 1:12 Collective, a 6″ (DOLLHOUSE) scale line of action figures with cloth clothing. (In action figure parlance, dolly clothes are called “cloth applications”.) They started slow, with a Frank Miller Dark Knight Batman (red flag? more likely the chunky design was an easy pilot project).

Then in 2016 they started releasing a cavalcade of fantastic cloth-costumed takes on the heavy hitters of the Marvel and DC universes, plus Classic Trek! These figures are unreal. They are crazy good. For 2017 they announced even more upcoming licenses and figures. Ghostbusters, Space Ghost, Universal Monsters and more. But there was only one planned female figure announced in 2016 – Harley Quinn.

Mezco Harley Quinn figure pre orderI was on their Instagram hassling them for months before she was announced, asking, “What the hell, dudes?”

Once she was announced, I thought we’d see a wave of female figures. In 2017, as the success of the Wonder Woman movie exploded on mainstream media, they announced a 1:12 Wonder Woman. But neither Harley Quinn or WW have shipped yet.

And no other female figures have been announced, despite the release of multiple male Classic Trek figures and Marvel heroes AND villains. *cough*Uhura*cough*Storm*. Know who is expected to ship by December? The Red Skull. Who is the Red Skull? He is a fucking Nazi.

That’s right, 1:12 toy collectors will get a NAZI before Wonder Woman.

As a woman, as a comics fan and former DC comics professional, as a serious lifelong toy collector, I gotta say, the optics are bad.

Mezco Wonder Woman 1 12Do better, Mezco. Do better, toy industry.

Meanwhile, guess I gotta make my own action figures with doll clothes “cloth applications”. Been plunging into male-dominated spaces since I became a graffiti writer in 1980, a hardcore comics fan in 1984 and a comics pro in 1993. Been genderqueering the toy space since the 1970s, when me and my best friend Bradley played with my Dawn Dolls. Not gonna stop, despite Nazis.Rachel Ketchum and Bradley Jankowitz 1974

See my mini projects that use similar techniques here:

Early Horribella dolls

Action figure customizing, June 2016

Berlin Horribellas: Mark V, Sept 2016, Mark IV, July 2016

and my Sideshow Bride of Frankenstein custom, October 2016.

A very old 12″ Living Dead Doll converted to a horrifying spider monster woman, October 2016.

Fearless Pink Gay Santa and his Jolly Ally Reindeer, December 2016.

1:12 scale gilt insect carriage and harness, June 2017.

Valentines Monster Doll Armada, February 2017.

1/12th scale Snow Queen/Jadis of Narnia, May 2017.

Using epoxy clay, November 2015.

 

Learning to sculpt: an articulated mantis sculpture cause I just love bugs.

Articulated mantis sculpture by Suzanne Forbes April 2017I started this mantis sculpture the summer before last.

Articulated mantis sculpture by Suzanne Forbes April 2017I don’t stress about when things get done; the project queue has no hierarchy.

So I went back to this pretty girl when I started to feel sculpty, a couple months ago. I used some epoxy clay to strengthen her limbs and smooth awkward areas.

The internet says it is perfectly safe to rebake polymer clay sculptures that have epoxy clay added to their armatures, and lots of sculptors use a mix of epoxy clay and polymer clay for strength. But I wouldn’t be like me and do it in your home oven. I am an unreliable guide on the subject of chemicals; after all, I put liquid LSD in my eyes when I was 14.

Here you can see Sally (which is the mantis gal’s name) with greyish-white epoxy clay added all over her and areas of plain and green Translucent FIMO still showing.

bug bricolage art and sculpture by Suzanne Forbes 2017I had been disappointed and frustrated by the performance of the colored FIMO transparent clays when first baking Sally.

There were a lot of “plaques” and cracking. Probably because I carelessly globbed the clay over the armature without making sure there were no air gaps, and didn’t have an oven thermometer yet, and didn’t let the oven preheat for a solid hour first.

Articulated mantis sculpture by Suzanne Forbes April 2017 Forgiveness not Permission is my making mode, and I figured try it first, see what happens.

So when I returned to Sally, I first thought I’d just cover her with epoxy clay and paint her and call it a day. But I found I still liked the transparency of her limbs and didn’t want to give up the bright greens of the clay after all. So I painted the epoxy clay areas shades of green to match and did another pass with a mix of colored translucent clays, adding some of my wonderful new Sculpey Premo Opal Accent Clay.

2016 Patron gifts by Suzanne ForbesThe Sculpey Opal clay is a new product and I ordered some from the US last Fall (I almost lost my mind waiting for it to come, checking the mail every day). I used it for the first time to make this piece and my 2016 Cake Level Patron gifts, here to the right.

It performs so amazingly well. It is very soft, and blends and smears beautifully, and it makes almost watercolor effects over other colors.

It is quite translucent, so it can be mixed with translucent colors to add opal glitter and soften and improve them. I mixed it with some dark green and some lavender for Sally, covered some of her epoxy clay areas and did an initial bake at the temp recommended for the Sculpey Opal clay. The results were amazing.

Articulated mantis sculpture by Suzanne Forbes April 2017Articulated mantis sculpture by Suzanne Forbes April 2017No plaques, beautiful translucency, just great. So I continued to add a little more volume and opalescence here and there, mixing with both solid colors and FIMO translucent colors. I kept rebaking, for thirty minutes each time, until I was satisfied with both Sally’s shape and her opalescence.

I put her Siam colored Swarovski crystal eyes on before the second to last bake. Once the circles of clay that held them in were baked I used Sculpey Bake and Bond to smooth the eye sockets nicely onto her skull.

I use my fingertip to smear the Bake and Bond; probably unwise. But it’s so goopy and hard to use!

I reinforced a crack in her abdomen with Bake and Bond.

The air trapped in the tinfoil I used to provide bulk with less weight had expanded during baking and caused a crack. I also added balls of clay to the top of her head to hold her antennae, poking the wire in to make a hole but leaving the wires out til later because they hit the roof of the oven! Then I did the last bake, and there she was. Articulated mantis sculpture by Suzanne Forbes April 2017

I am really pleased with her, honestly.