Magma, Amara Acquilla, is one of the more problematic New Mutants.
Every character is someone’s favorite, but I personally never felt any emotional connection to her whatsoever. Which is funny, given how much I loved the other original New Mutants.
So while I felt she should be represented in my X-Men dollhouse, along with Rahne and Dani and Shan and Doug and Warlock and Illyana and Bobby and Sam and Kitty, I figured I’d put her in the Danger Room.
In the Danger Room, her wild powers would be a great visual.
Since there is not yet a commercially available Magma in 1/12 scale, I had to make one.
I used the old Toy Biz Scarlet Witch as a base, since she has the same chunky glove and boot cuffs as the old school New Mutants. Amara’s costume details don’t show when her powers are active actually – the costume “disappears” because of “unstable molecules” like Rahne’s does – but I thought it would be funny to have them and also help signal who she is.
I’m not a stickler for anything, really.
Including action figure customizer materials protocols! Many customizers use hot glue to form flame and power effects, if they’re not set up for casting resin. But I used UV resin to form Amara’s head spikes. I sculpted them in my beloved Apoxie Sculpt first, then painted the whole figure with artist’s tube acrylics thinned to the consistency of heavy cream. Three isolation coats of Mod Podge helped seal her paint nicely.
Then I added the resin, mixing three colors and sitting in the sun outside and letting it cure on the fly. This was before I had a powerful UV LED resin curing lamp, so to get fast curing the sun was my best plan. It was messy, because UV resin is goopy and hard to control, and I wound up getting thick drops at the ends. I had to sand them down and re-resin!
Next time I’ll use the technique miniaturists use for getting drips and streams of epoxy resin – a bit of clear nylon fishing line for the resin to cling to and follow along.
But this one is close enough for government work, as my editor Margaret used to say when I worked on Star Trek!
Lots of real customizers have done Magmas, do check out how the professionals have visualized her 🙂 I like this one a lot, and this mod using the Carol Danvers head works well. I would have liked her to be clear like the Minimate, but I didn’t care enough to hunt down a clear Sue Storm who would work.
I did buy this amazing Figma base for her.
The crackly lava base is seen here with X-23 standing on it as a placeholder, I’ll have more actual Danger Room shots coming soon! Yes, X-23 isn’t part of “my” era of X-Men/New Mutants, but I love the character, so – don’t care! Not a stickler.
Dollhouse planning drawings by Suzanne Forbes, Aug 30 2018
My first dollhouse became a kind of Valhalla, a safe haven for all the characters and stories I love. it is a large, unwieldy, fragile metaphor for healing, hope and closure.
I imagine the School for Gifted Youngsters will work in a similar way, but more specific. My feelings about the X-Men and The New Mutants are my strongest of all and there is a lot of processing happening within even starting this project.
Also, my first dollhouse took ten years to complete, so I must be out of my mind. But actually, not so much; I have a plan.
I knew from pretty early on in the construction of my first dollhouse, around 2000, that I would need a second dollhouse. I already had too many action figures, even then, and too many weird geek jokes and visual puns and obscure heart-wrenching vignettes to tell with them.
Plus, as more and more X-Men action figures were made, it became clear the X-Men and the New Mutants would need their own house.
As I searched for a second dollhouse over the last ten years, I knew I wanted it to look a certain way. More “mansion”, less Victorian curio. Designed to be front-opening and kept for display against a wall in the English “Dolls House” style rather than open in the back for play like an American “Dollhouse”.
And I wanted it to be a “quick-build” routed MDF style, for fuck’s sake, rather than the insanely laborious die-cut kits that are now almost completely replaced by slightly less laborious laser-cut kits.
I never want to do a die-cut kit again, though I’m glad that I did get the very last Cambridge Dollhouse available on the West Coast in 2000. (For some reason I was obsessively determined that the Cambridge was superior to the nearly identical Greenleaf Beacon Hill).
There’s an excellent explanation of the different types of dollhouse kits here on Mysterious Miniatures for anyone curious about the hell that is punching out and sanding hundreds of die-cut pieces from a stack of 1/8″ plywood sheets. You can also see lots of pictures and read more about the process of building my first house here.
Below, the far superior routed/sawn MDF pieces of my Gables Dolls House kit, primed and laid out yesterday.
The reason I pulled the trigger and bought my first dollhouse kit was that the model I had been eyeing suddenly disappeared from the tiny pool of online shops that existed then.
Windows for the new house primed and drying before painting.
Panicked, I called all over, looking for a Cambridge, and actually found one, the last one, at the big dollhouse store near Disneyland. I ordered it in triumph and terror, and spent the next three years just building the structure.
Of course, I “kitbashed” the hell out of it too, custom building the extension, rebuilding the dormers and adding new walls and high quality Houseworks wooden windows and doors.
To use routed wood doors and windows I had to reinforce all the interior and exterior walls individually, from 1/8″ to 3/8″, cutting all the pieces to size. Without power tools.
I had to learn to solder to use tape wire for the electrification, because it didn’t have grooves for round wire. It was insane, and I said “I am never doing this again”.
So I kept an eye out for a front-opening, high-quality, quick-build dollhouse that was also really cheap. For a decade.
During that time several models I liked went on and off the market. I didn’t have the wherewithal, on many levels, to acquire any of the models I liked. I finally completely finished the first house and added the landscaping, walls and greenhouse in Oakland around 2013, but I waited to secure it to its base because I knew we were leaving the US.
I knew if we moved to Europe I’d have access to a completely different dollhouse kit supply chain, the mother lode of front-opening English dollhouses. And when we did, I started researching and pinning and comparing all the houses available. I got my first house set up and truly finished here in 2015.
It had to fit a very specific space, and be a very specific style. After two years of research, I had pretty much settled on The Gables kit from The Dolls House Workshop, a family-run British company.
It was gorgeous, it fit the space next to the first house perfectly, it had big rooms, it had an entry hall, it had bay windows, it had an attic for Ororo, and it was the very epitome of quick-build, including channels routed for the goddam wiring.
Most of all, it was incredibly cheap for a heirloom dollhouse kit, only £209 when they can run to the thousands.
So I was thinking about it, but I am cheap and terrified of spending large sums, so I was hesitating.
Then it started disappearing from the four online sites I had it pinned from. Marked “Discontinued”, then “Permanently Discontinued”. It was still listed on the company’s own site, so after a week of nerve-wracking waiting til my Patreon money came in, I wildly took the plunge and ordered it. Two days of euphoric planning and excitement later, I got an email from DollsHouse Workshop.
They politely explained the kit had been discontinued some time ago and it shouldn’t have been on the site.
They would process me a refund. I was crushed and at a loss. I just didn’t know what to do next. None of their other models had the turned wood windows l love, were the right size, or even had grooves for the damn wiring. The other companies’ houses didn’t move me the same way.
After a couple of days of moping, I emailed the company to check on the refund, which hadn’t shown up. I mentioned that I was devastated, that I had really wanted that particular house. I don’t why I did, I guess I just figured it couldn’t hurt to share my truth!
Later that day, I got an email back from Kelly Wiltshire-Tokeley, co-director of the company, saying she had tracked one down and it would ship that week!
What an angel! Isn’t that amazing?
Oh joy! Oh happiness! The X-Men will have a home at last!
Seriously, this is such a big deal. And of course, such a big project.
Even a quick-build dollhouse is a huge DIY project, with many stages, many decisions, and many materials involved. First I did a dry build, to check for fit and parts.
Then I had to prime. The MDF walls had to be primed with a specialty MDF primer, and the turned wooden parts primed with a wood primer.
On the left you can see some of them! Our whole house smells like primer right now. The stairs will be stained with gel stain, which I’ve ordered.
I have all the paint ready for the exterior and have ordered all the wallpaper and carpets. Putting those in before actual final assembly will make a difference of at least a hundred hours’ labor between this house and the first house.
I will use modern battery powered LED lights and run a single wire through each room rather than tapewiring the whole thing.
Plus, this house has a perfectly simple rectilinear floor plan, rather than the incredibly complex layout of House #1. Which I think I will call SlurkCroft, from now on.
So I’m not making any promises or predictions, but I’m hopeful that the School for Gifted Youngsters will be open by Christmas.